PnR for OP Amp, Placement and Routing

 (sonnet 5.5 Medium)

 

Here are your prompts from this session, in order:

1. [schematic image attached] "IC PnR, on a die"
2. "device level"
3. "components on a die"
4. "3d die"
5. "with routing"
6. "extract netlist from schematic" (with the schematic image attached again)
7. "The next step is a Python router (e.g. a grid maze router on M1/M2) that produces these wires automatically from the netlist. I can write it if you want. I'd need your netlist and layer pitches to make it real. do it"
8. "routed svg in png"
9. "show all prompts this session"

Prompt 7 quotes my earlier offer, followed by your "do it".

(Opus 5.5 Max)

Two-stage BJT op-amp on a die

Also your six prompts in order, in Taipei time.